Account

Toll Free (US): +1-800-641-8150
International: +1-503-692-4430
sales@fibersensys.com

 7:00AM to 4:00PM (PST)
Tech Support: +1-503-726-4455
support@fibersensys.com

6175 NE Century Blvd.
Hillsboro, OR 97124 USA
Fax: +1 503.692.4410

Fiber SenSys SecurLAN™ Products

It has been demonstrated and verified that SecurLAN™ solutions are offered at the lowest cost per zone in the industry. The products have also been approved and certified for the protection of the PDS, and are compatible with all varieties of network architectures, including secure passive optical networks (PON).

SecurLAN is compliant for use in network Protected Distribution Systems (PDS) at US Government installations built in accordance with the following guidelines:

    • Committee on National Security Systems CNSSI No.7003 (Sept. 2015 Protected Distribution Systems)
    • Air Force Instruction AFSSI 7703US
    • Navy Protected Distribution Systems Guidebook NAVSO P-5239-22
    • US ARMY Regulation AR25-2

SecurLAN Overview

SecurLAN™ is compliant for use in network Protected Distribution Systems (PDS) at US Government installations built in accordance with the following guidelines:

  • Committee on National Security Systems CNSSI No.7003 (Sept. 2015 Protected Distribution Systems) Air Force Instruction AFSSI 7703US Navy Protected Distribution Systems Guidebook NAVSO P-5239-22 US ARMY Regulation AR25-2
  • Provides instant notification of unauthorized access, tapping attempts, and accidental intrusions
  • Provides multiple alarm notification options and can provide positive network shutdown of the affected protection zone when combined with FSI optical cutoff switches
  • Makes protecting DOD networks cost-effective
  • Enhances security through multiple annunciation and network communications capabilities
  • Eliminates the need for visible inspection requirements when securing a PDS. Network raceways can be concealed above the ceiling or below the floor.

In the context of classified DOD networks, Protected Distribution Systems (PDS) is a system of carriers (conduits, ducts, etc.) that are used to distribute Military and National Security Information (NSI) between two or more controlled areas or from a controlled area through an area of lesser classification (i.e. outside the SCIF or other similar area).

SecurLAN® 300 Series

SL358R

Rack-mounted single-zone Alarm Processor Unit is equipped with TCP/IP (native XML messaging) and supports a sensing cable length of up to 5km; with insensitive lead-in cable up to 20km for remote APU deployment. The RK-348 rack housing holds up to eight SL358R APU’s.

    • Supports multi-zone operation
    • Hot-swap modules
    • Linear, uniform sensitivity SpectraView™ tuning and diagnostic software included

SL358R-SM

Specifically designed for SecurLAN PDS applications, the SL358R-SM comes with all of the features of our SL358R and the added feature of allowing your new or existing single-mode cable to operate as the sensor.

The SL358R-SM does NOT support insensitive lead-in cables.

SL352

Designed for remote deployment, this dual-channel SecurLAN APU can be located (up to 20km) from the protected zone.

    • Up to 5km sensing cable
    • 25+ configuration parameters
    • SpectraView software included
    • Ideal for high-security applications requiring remote capable APU
    • IP/XML compatible
    • Linear, uniform sensitivity

SL352-SM

Designed for non-remote SecurLAN deployment and the ability to utilize single-mode cable, allows your new or existing single-mode cable to be the sensor.

The SL352-SM does NOT support insensitive lead-in cables.

SecurLAN® 500 Series

SL504 / SL508

The SL504 monitors up to four different sensing fibers (zones), and the SL508 can support up to eight. Each sensing fiber can be up to 5km in length for maximum perimeter protection. Remote APU deployment with insensitive lead-in cable capability.

    • 1U rack-mount APU
    • Includes relays
    • Internal distribution assembly
  • All 500 Series Alarm Processors include 500 Series Software Suite for tuning and calibration
  • All 500s fit in a standard 19-inch rack
  • Nuisance alarm discrimination with custom tuning software
  • Integration capability with head end/annunciator panels
  • Environmental noise compensation
  • Linear, uniform sensitivity
  • Simultaneous intrusion detection reporting all zones
  • XML messages communications

Optical Cutoff Switches

SecurLAN has two functions; to detect an intruder, and to deny access to data. The cutoff switch is responsible for denying access to an intruder. Once the system detects an intrusion attempt, the cutoff switch physically turns off the data in the area of concern, ensuring that the breach in security does not result in stolen data.

 

    • Works with multimode or single-mode data lines
    • Creates an absolute data shut-off
    • Integrates with the SecurCommander command and control system

SecurCommander™ Software

A command and control interface that when combined with SecureLAN optical sensors and data cutoff switches form a Protected Distribution System (PDS) capable of shielding sensitive networks from physical attacks, tapping, or accidental damage.

 

    • Meets US military guidelines for PDS systems
    • Interactively monitors and controls system sensor solutions
    • Enforces organizations’ Standard Operating Procedures (SOP) via a customizable case management workflow and communication settings
    • Microsoft SQL Server database and reporting functionality
    • Client-server functionality

Product Information and Downloads - SecurLAN

  • SecurLAN

SecurLAN

Download
SS-SM-077 SL50x Spec Sheet Rev C1.76 MB66 DownloadPreview
BR-SM-104 SecurLAN Overview Rev. D386.39 KB69 DownloadPreview
BR-SM-077 SecurLAN Brochure Rev. C369.65 KB60 DownloadPreview
BR-SM-028 SecurCommander Rev C935.95 KB54 DownloadPreview
BR-SM-026 SL508 Brochure Rev. D378.77 KB49 DownloadPreview