Product Software

Below is a list of all our Fiber SenSys product software downloads.

Please note that you are required to log in before you can download software packages.

If you do not already have an account with us, please register an account and you will be notified as soon as your account has been activated.

Device SDK

The Device SDK provides an Application Programming Interface (API) for locating, connecting to, changing settings on, and monitoring FD3xx and FD5xx APUs across a TCP/IP network. Monitoring includes notification of alarms, faults, communication failures, and tampers. The vocabulary of settings depends on the APU but matches those exposed in Fiber Commander’s APU settings form.

The download file does not require a password.

MDTEST

MDTEST is the setup and maintenance utility software for the Digital Microwave Defender. It provides all the tools necessary to set up the parameters of each detector: a visual oscilloscope display mode, a tuning mode, a mode for observing previously recorded events, and a mode for reviewing the alarm history. MDTEST offers the most precise and reliable solution for tuning the MD5xxx series microwave security system.

This software is a part of the MDTEST product line and available for sale. Please contact your FSI territory manager or info@fibersensys.com additional information.

  • Microwave Defender products are sold in North and South America only.
  • Requires purchase.

500 Series Software

The 500 Series Suite consists of several Windows-based configuration and calibration modules for the Fiber Defender® 500 series of alarm processing units.This software is also included on the Product CD, which additionally includes drivers, manuals, and other utilities.

Use 500 Series Suite to perform functions such as:

  • Configure the intrusion-detection system
  • Create hyperzones
  • Calibrate the system View real-time signals from the cable assembly
  • Record and save signals from the sensor cables
  • Review and analyze recorded sensor-cable signal files
  • Predict optimal system calibration settings through signal modeling
Version 5.6.0 of the software includes a variety of fixes and improvements, including the following:
  • Added Realtime Acoustic Power Graph
  • Added Realtime Wind Load display
The download file does not require a password.

SpectraView

SpectraView is Windows PC software for configuring and tuning most Fiber Defender® 300 series alarm processing units (except FD322). This software is also included on the Product CD, which additionally includes drivers, manuals, and other utilities.

Use SpectraView to perform functions such as:

  • Configure and tune the intrusion-detection system
  • View real-time signals from the cable assembly
  • Record and save signals from the sensor cables
  • Review and analyze recorded sensor-cable signal files
  • Predict optimal system calibration settings through signal modeling

Version 17.04.20 of the software includes a variety of fixes and improvements, including the following:

  • Removed requirement to set separate 'enable record' button
  • Allow up to 40dB for processor 1 low-level tolerance (when firmware allows)
  • Prevent use of comb reject values 10-40 Hz
  • Modeler was shifting values by 10Hz when processing

The download file does not require a password.

Note: If you need SpectraView version 12.x for the Fiber Defender® 200 Series ONLY, you can download below.

FD322 Tuning Software

FD322 Tuning Software is Windows PC software for configuring and tuning Fiber Defender® 322 alarm processing units. This software is also included on the Product CD, which additionally includes drivers, manuals, and other utilities.

Use this software to perform functions such as:

  • Configure and tune the intrusion-detection system
  • View real-time signals from the cable assembly
  • Record and save signals from the sensor cables
  • Review and analyze recorded sensor-cable signal files
Version 15.10.31 of the software includes a variety of fixes and improvements, including the following:
  • Addition of a Status panel for checking system health
  • Improved speed when configuring & tuning
  • Improved stability under unusual conditions
The download file does not require a password.

Lenel OnGuard Integration

Fiber SenSys, Inc. (FSI) has created software that allows monitoring of our Alarm Processing Units (APUs) using Lenel's OnGuard access control and intrusion software.

The download file does not require a password.

Fiber Commander v2.4

Fiber Commander™ is a software application that provides comprehensive and intelligent monitoring and control when combined with Fiber SenSys Alarm Processor Units (APUs). The software is a key part of an integrated perimeter security solution with the lowest nuisance alarm rate, highest probability of detection, and lowest overall cost of ownership.

This product requires purchase and a password.  Request Password

Milestone XProtect Integration

Fiber SenSys, Inc. (FSI) has created software that allows monitoring of our Alarm Processing Units (APUs) using Milestone's XProtect video management software.

The download file does not require a password.

Genetec Security Center Integration

Fiber SenSys, Inc. (FSI) has created software that allows monitoring of our Alarm Processing Units (APUs) using Genetec's Security Center video management software.

The download file does not require a password.

User Manuals

Downloading user manuals requires login. Multiple languages available.

Download User Manuals

Training & Certification

Training dates and forms for our factory and online training options.

Training Information

Product Software

Downloading product software requires login.

Download Product Software

Fiber Defender Family Brochure