Point Defender PD500

The E2EC techonology is responsible for several important benefits including cut tolerant cable configuation, failover processor configurations, and sensitivity leveling.

Cut Tolerance: If a single cable cut occurs, a processor to the right will continue to detect to the cut point from that direction while the processor on the left will detect to the cut from the left-hand side. This means that no detection area is lost.

Processor Failover: In a similar manner to cut tolerance, if a processor fails, the processor to the right will continue to detect till the point of the failed processor, and the processor to the left will do the same in that direction.

Sensitivity Leveling: As a result of the sensitiviy being averaged from both sides of the cable, the sensitivity across the enire length of that cable is linear. There are no hot or cold spots in the system sensitivity; this creates a predictible system that captures alarms and rejects nuisance sources.

These features are critical to sites that value security and reliability.